How to use the water jet cutting machine correctly? How much do you know about our waterjet? Waterjets play a very important role in our industrial production. Many workers can operate water jets. But you know, we are also very particular about the operation of water jets. If the operation is improper, it will have a great impact on our work efficiency. Let the editor teach you some waterjet operation skills, I hope it will be helpful to your work.

The following are the operating skills of water jets in various situations for your reference.

1. Cutting thick materials: When cutting materials with a thickness less than 2.5, the yield of medium or large cutting heads is not high. If necessary, small parameter combinations can be used, and multi-head cutting can be considered to increase output.

2. Air gap encountered during cutting: Avoid cutting the air gap larger than 0.5 mm. The nozzle is easy to diverge in the air gap, so the surface will be very rough when cutting the lower layer. When stacking and cutting, keep the paper neatly stacked together.

3. Smaller grinding net: Smaller grinding net will slightly reduce the speed, but can produce a smoother surface.

4. Increase or decrease the water pressure through the controller.

5. The control system specially designed for this process is usually more effective and easier to use than general multi-process control.

6. Automatic loading and unloading, most machines do not use automatic loading and unloading technology, such as shuttles.

7. Ordinary tap water: The waterjet system uses ordinary tap water. 90% of pure waterjet and sand waterjet users only need to soften the water, and then enter the booster through the pump water filter. Reverse osmosis and deionization technology can greatly extend the life of the nozzle, and also cause expensive damage to the supercharger and high-pressure pipe.

8. Underwater cutting: Underwater cutting can reduce the atomization of the surface or the upper edge in the process of sand waterjet cutting. Underwater cutting can greatly reduce the noise during cutting and make the working environment more tidy and orderly. The disadvantage is that the operator cannot see the jet cutting clearly during the cutting process. Through the above simple explanation, do you know the skills of our water jet? Hope your future operator can help you.